Showing posts with label Wooden Wine Box Panels. Show all posts
Showing posts with label Wooden Wine Box Panels. Show all posts

Saturday, March 22, 2014

9 Georgeous Wine Crate Panel Surface Coverings

Wine crate panels and wine box ends are perfect for wine-themed surface coverings. They can be installed on walls, tables, ceilings and even floors. Below are 9 projects done with wine crate panels:

San Diego Padres Stadium Wine Bar

 
Dallas Ritz Carlton Penthouse Wine Cellar
 

Private Collector's Wine Library
 

 
Staircase Easing Decorated w/ Wine Panels
 

Wine Crate Panel Wedding Dance Floor
 



Grapes the Wine Co. Rare Wines Vault
 
 
Private Wine Cellar. Trim and Walls Adorned with Wine Panels
 
 
Wine Panels as Drawers on Credenza. Designed for a Country Club in Texas
 
 
Wine Cellar w/ Glass Door Enclosure
 
 
Buy wine panels for your own special project! Visit www.winepine.com
 
Follow us for special updates!
 


Monday, June 18, 2012

How many wine panels do I need to cover my wall?

How to determine square footage for a wine crate panel wall

We frequently get asked "how many wine panels are needed to cover my wall?"

Below is how to determine the square footage of the wall, and how large the wine crate panels are:

The Wall

The first thing to determine is the square footage of the wall. The square footage is found by multiplying the length of the wall by the height of the wall.

For instance; the below picture from left to right (length) is 12 feet across


The top to bottom (height) from the floor up to the ceiling is 8 feet

12 feet X 8 feet = 96 square feet

The wall is 96 square feet.




The Panels




The above panel is the same size and style of the panels on the Grapes wall, which are:

12" L (left to right) X 6" H (top to bottom).


This means that each panel can cover 1 foot left to right and a half foot top to bottom. If you were to place one panel on top of another on the wall, you would get one square foot of coverage space.


Two Wine crate panels covers one square foot.


The grapes wall is a bit complex because of the windows, but if you remove the windows from the wall you would have 16 rows (top to bottom) of 12 panels across (left to right). 


12 X 16 = 192


Without the windows you'd need 192 panels to cover a 96 square foot wall.


Wine crate panels are very easy to trim, cut and finish. We did a bit of this to make the panels flow around the Grapes windows. You may have some corners to work through like the picture below:




This is the Ritz Carlton Penthouse wine cellar in Dallas. Some of the panels were placed vertically to enhance the look. The project was done by architects, interior decorators and contractors working together, so this type of design is more suited for highly skilled professionals.


Feel free to visit us at www.winepine.com for pictures, details and questions on how to create your own unique wine panel project!

Visit us at: www.winepine.com

A special thank you to:

@anntran_

@cammipham

@grapestwc

@problogger

Your relentless work in the pursuit of something better inspires me.

Saturday, August 27, 2011

4 Unique Wine Panel Projects

Below are four different styles of wooden wine panel projects. Each one is unique, and this is an excellent guide for your interior decorator, contractor or architect. We generally recommend working with a professional when installing wine panels.

All-Collector's:


Grapes the Wine Company rare wines vault

 
This is a fairly uncomplicated type of wine panel project, as it requires minimal cutting and no major design plan needed

Space requirments: The All-Collector's strategy is ideal for walls, ceilings or floors that are perfectly square and clear.

Tools needed: Notched trowl and canned liquid nails

(Recommended): Chopsaw and ruler

Level of difficulty: (Scale of 1-5 with 5 being hardest): 2

How to do it:

Measure out the space and determine the square footage. Each Collector's panel is approx. 12" X 6", so 2 panels covers one square foot. We can trim them down for you if they are slightly larger, or you can do this yourself with a chopsaw. Call us and let us know what the square footage is. We can then work together and plan out which panels to work with based on your preferences.

Once the panels arrive, decide how your going to lay them out on the space. Take the notched trowl and add the liquid nails to it. Apply the liquid nails evenly accross the back of the first panel. Attach the first panel to the wall. Repeat this process until all of the panels are on the wall.

Additional information: In a perfect world, all of the panels will fit perfectly on the space. This isn't always the case. If you come to the end of the space and there isn't enough room for the last panel, simply take your ruler and measure out the last panel vs. how much room is left on the space. The chopsaw can trim that remaining portion from the panel to make it fit perfectly. Always use the maximum protection when using a chopsaw. We always prefer when a client works with a professional contractor when installing wine panels. It's a very quick and easy job for a professional.

Varnish, stain or polyurethane: Wine panels can be easily finished. We prepare all of our panels for a first coat of finish before they arrive to your project. We don't finish them, as we've found that clients often prefer to finish them on the job. There are many different stains that can be used to compliment the overall decor. Choose one that fits you best.

Polyurethane or varnish can be applied to to give them a glass-like finish. You can either apply the stain or varnish when all of the panels are attached, or individually finish them before they go up. The best way is to apply the finish to them individually, but it's also the most time consuming. Applying the finish after the project is done is the fastest way to complete the project.

Another advantage to individually varnishing each panel is that it seals them, and protects the panels from moisture.


Montage:


Ritz Carlton Penthouse, Dallas TX


A wine panel montage is definitely the most difficult project. We highly recommend an interior designer, contractor and possibly an architect.

Space requirments: A montage can be done in any space. If your planning to do a montage as a floor project, we recommend using a planer to make sure the panels are exactly the same thickness.

Tools needed: Blueprint or plan of action, notched trowl, canned liquid nails, chop or tablesaw.

(Recommended): Planer and ruler

Level of difficulty: (Scale of 1-5 with 5 being hardest): 5

How to do it: Every montage project is completely unique. This is something that needs a professional or two.

Additional information: If you want to do this yourself, you should ideally have some experinece with blueprints and woodworking. This type of project has all kinds of panels mixed together. There will be many different types and sizes. It will be easy to get lost without a plan.

Varnish, stain or polyurethane: Same as above


3D Effect:


Peconic Bay Winery staircase leading to wine vault


This type of project is similar in difficulty to All-Collector's, but it is somewhat more involved.

Space requirments: Wall or ceiling.

Tools needed: Blueprint or plan of action, notched trowl, canned liquid nails, chop or tablesaw.

(Recommended): Planer and ruler

Level of difficulty: (Scale of 1-5 with 5 being hardest): 3

How to do it: The difference between 3D and All-Collector's is that the 3D adds thicker panels to the design. Many panels from Napa Valley such as Dominus and Bond are approx. 3/4" thick. Most Bordeaux panels are approx. 3/8" thick.

This is a highly artistic and visual strategy. There is no one way to make this work. A plan is helpful for maximum results. You would want to place the thicker panels in areas that would add to the 3D effect. Too many thick panels in one place may flaw the design from a visual perspective. There also may be some panels that need thicknesses reduced with a planer.

The best way to begin would be to add tape to the back of each panel, and temporarily affix the panels to the wall one at a time. This will give a great idea as to how the project will come out. You can always move the panels around based on preference.

Additional information: As a DIY project it is doable, but we always recommend a professional. This type of project is fairly uncomplicated for a woodworker or contractor. It wouldn't hurt to hire an interior designer at least for a consult.

Varnish, stain or polyurethane: Same as the previous projects.


The Outlay Effect:


Davanti Enoteca Wine Bar, Chicago, IL

The Outlay Effect is a little bit harder than it looks. The concept is to install the first set of panels to cover the wall, and then mix other panels on top of the first set.

Space requirments: Wall or ceiling.

Tools needed: Blueprint or plan of action, nail gun or notched trowl with canned liquid nails;

(Recommended): Chop or tablesaw

Level of difficulty: (Scale of 1-5 with 5 being hardest): 4

How to do it: Davanti Enoteca is a fine Italian restaurant with several restaurants all over the US. The management team of Davanti invented The Outlayed Effect.

How they approached the project can be found in the "Look: Chicago" magazine. The starting process is similar to All-Collector's, but the issues begin once your ready to apply the next set of panels above the first. The best results of this strategy come when your able to place the second set of panels above the first, without covering up the first set's logos. The next step is even more complicated, because now you place a third set of panels above the first and second set!

Additional information: I would recommend working with a professional on a project such as this. It's possible to do this yourself, but this type of project is bound to have unforseen complications.

Varnish, stain or polyurethane: Same as the previous projects.

Visit us at: www.winepine.com

Sunday, August 7, 2011

The 7 Types of Wooden Wine Panels

Wine panels are the engraved sides of a wooden wine crate or box. The majority of wine panels have unique designs and logos from the winery that made them.

There are 6 types of wine panels broken up into four catagories:


Classic Panels:

1. Chateau and Estate:

This panel type comes from the long side of some 12 bottle wine crates Bordeaux crates. Most Bordeaux 12 bottle crates are 19 1/2" L X 13" W X 7" H. The Chateau & Estate panels come from the 19 1/2" side. The average dimensions of Chateau & Estate panels is 19" L X 6 1/2" H. The average thickness of Chateau and Estate panels is 1/4" - 3/8".

Chateau and Estate panels are engraved with just winery lettering. They have no designs or artwork. They generally compliment a nice French Provincial style design, or can be filled in with other types of panels to cover a space.

Several different Chateau and Estate panels



2. Winery Branded:

Winery Branded panels are similar to Chateau & Estate, but they are from the 13" side not the 19 1/2" side. They are nearly half the size of Chateau & Estate, and also have just engraved winery lettering with no artwork. The average dimensions of winery branded panels is 12" L X 6 1/2" H. The average thickness is 3/8".

Assorted winery branded panels


3. Border Panels: 

The border panels are from 3 or 6 bottle flat crates, so their dimensions can vary quite a bit. These types of panels are excellent as a trim around the tops and bottoms of a wall because they are long and thin. Dimensions can be anywhere between 10" L X 4" H and 19" L X 6" H. Thicknesses range from 1/4" - 3/4" depending on the winery. The size difference in dimensions is because the shorter sides of a flat crate are smaller than the longer ones. A perfect example is below:

Chatea Pape Clement flat 6 bottle crate


As you can see, the Bernard Magrez side is twice as long as the Pape Clement side. What we do is prepare the crate to a smooth texture, dismantle the piece, and both of these sides become border panels similar to the picture below:

Border panels from Portugal, Italy, Burgundy and California

4. Collector's Panels:

This panel type is our best seller. The majority of Collector's panels come from the from the front (13" side) of a Bordeaux, Italian, Spanish, Portugal or California wine crate. They have beautiful designs and artwork, and each one is unique. The average size of a Collector's panel is: 12" L X 6 1/2" H. The average thickness of Bordeaux panels is 3/8"

A variety of Collector's panels from Bordeaux


5. Large Collector's Panels:

This is a rare type of panel. Most wine crates are only branded on the front short side. Large Collector's panels have the artwork on the long (19" side). The engraved branding on these is much larger than the regular Collector's panels because they are almost twice as long. The average dimensions of a Large Collector's panel is 19" X 6 1/2" H with an average of 3/8" thickness. Some may be larger or slightly smaller.

There are crates such as a 6 bottle magnum or 24 1/2 bottle crates, where the Large Collector's panel is considerably larger or taller in some cases.

Assortment of Large Collector's panels from Bordeaux, Rhone and Burgundy, France


6. First Growth Panels:

The five First Growth's of Bordeaux are: Chateau Margaux, Chateau Latour, Chateau Mouton Rothschild, Chateau Lafite Rothschild and Chateau Haut-Brion. These are extremely rare wines, and the panels are highly sought after.


7. Exclusive Class

The Exclusive Class are the most rare and highly detailed wine panels in the world. The crown jewel of Exclusive Class is a Domaine Romanee Conti (DRC), which is the most expensive and arguably the best wine in the world. DRC is from Burgundy, so each of the DRC wines come from single vineyards. The vast majority of DRC wines from any single vineyard are sold on the futures market well before they go to retail. This is one reason that the panel is so difficult to acquire. The private investor almost always retains the original crate with their purchase. A picture of a DRC crate is below (DRC crate not panel. The panel is displayed in front):

1988 DRC Richebourg 12 bottle wine crate



Other examples of rare Exclusive Class panels are (These pictures are of the crates not the panel. These crates are from our reserve collection, and they will not be dismantled unless purchased and requested):


Screaming Eagle


Very rare Silver Oak double magnum


Nickel and Nickel 6 bottle crate


Harlan Estate "The Maiden" 3 bottle crate


 Visit us at: www.winepine.com